Well filter up to 12 bar

SYDROS WELL FILTER PRO – 12 bar well water filter for clean drinking water

10-stage high-performance system with stainless steel housing & UV-C water disinfection

The SYDROS Well Filter PRO is the ideal solution for anyone looking to reliably treat their well or domestic water system. Thanks to its robust 316 stainless steel construction and a pressure resistance of up to 12 bar, the system is suitable for private households, agriculture, and commercial use. With its 10-stage filtration, it removes sediment, limescale, heavy metals, microplastics , PFAS & PFOS , pesticides, and bacteria – for hygienically safe water directly from the well.

• UV-C water disinfection (253.7 nm): Neutralizes up to 99.9% of bacteria, viruses & legionella
• High pressure resistance: Designed for 10–12 bar, suitable for powerful pumps and domestic waterworks
• Sustainable & low-maintenance: No chemicals, no salt, no magnets

10-stage filter system in detail

1. Backwash filter (50 μm stainless steel): Removes coarse sediment such as sand, rust, and sludge. No cartridge changes necessary.
2. 3-stage pre-filter (10 inches):
   • Coarse sediment filter against suspended matter & sand
   • Fine membrane for heavy metals, microparticles & rust
   • Activated carbon block for chlorine, pesticides, solvents & odors
3. 4-stage high-performance drinking water filter (20 inches):
   • PAC membrane against organic substances & VOCs
   • PP-Pure Performance: removes microplastics, PFAS & drug residues
   • NanoShield activated carbon: adsorption of toxic residues & odor neutralization
4. Limescale Breaker XL: Reduces limescale deposits by up to 92%, without salt or chemicals.
5. UV-C water filter (253.7 nm): Reliably kills bacteria, viruses & protozoa – without chemicals or loss of taste.

The result: crystal-clear, germ-free, and low-pollutant water – straight from your own well.

Scope of delivery

• 1× stainless steel backwash filter (50 μm) including connection set
• 1× 3-stage stainless steel pre-filter (10 inches) including cartridges
• 1× 4-stage high-performance filter (20 inches, 4-fold) including cartridges
• 1× Limescale Remover XL (maintenance-free, without salt)
• 1× UV-C unit (230V, 50Hz, Type-F plug)
  
• Wall brackets, mounting kit & Teflon tape
• Operating instructions

Technical data & application

• Application: well water, domestic waterworks, cisterns
• Flow rate: up to 2,000 L/h (30–35 L/min)
• Max. operating pressure: 12 bar (recommended: 10 bar)
• Pressure loss: 0.5–1 bar
• Filtration fineness: up to 0.01 μm (ultrafiltration)
• Connection: 1 inch standard thread
• Operating temperature: 4–40 °C

Replacement intervals: Pre-filter every 6 months, main filter every 6–12 months, UV-C lamp annually. The backwash filter can be used permanently.

The service life depends on the water quality and usage behavior.

Conclusion: Buy well filters & use them safely

With the SYDROS Well Filter PRO, you get a high-quality 12 bar well water filter system that reliably removes sediment, limescale, microplastics, PFAS, and bacteria. The combination of 316 stainless steel, UV-C water disinfection, and modern filter technology transforms your well water into safe drinking water – sustainable, low-maintenance, and chemical-free.

SYDROS – Water reimagined. For your home.